 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MLVS Series MLVS-0402 Series This specification is applicable to Chip Metal Oxide Varistor in multilayer technology. Specifications 1. Rating(25 O 5J ) Resistanc e Ir X10 ohm (Min.) 5 VDC O 10 * O 10 * O 10 * O 10 * O 10 * 6 Features 1. Keeping low and stable leakage current. 2. Excellent assembly solderability. 3. Low clamping Voltage. 4. Quick response time (<1nSec.) 5. High transient current capability 6. Test Standard meets IEC 61000-4-2, 61000-4-4, and 61000-4-5. Working voltage Symbol Units Test Condition MLVS0402M04 MLVS0402M07 MLVS0402L08 MLVS0402K11 MLVS0402K14 4 7 8 11 14 VRMS Volts VDC Volts (Max.) < 10 A 5.5 9 11 14 18 Peak current imax Amps (Max.) 8/20s 20 20 20 20 20 Transient energy Wmax Joules (Max.) 10/1000s 0.05 0.05 0.05 0.05 0.05 Applications Applications for Mother Board, Notebook , Cellular Phone, PDA , handheld device, DSC, DV, Scanner, and Set-Top Box etc Part Number SeriesType Elements Size Tolerance Vrms MLV MLV MLV MLV MLV S S S S S 0402 0402 0402 0402 0402 M M L K K 04 07 08 11 14 *Measured resistance at 3.3V DC VRMS - Maximum AC operating voltage the varistor can maintain and not exceed 10 A leakage current VDC - Maximum DC operating voltage the varistor can maintain and not exceed 10 A leakage current Ir - Resistance at 5 V DC Imax - Maximum peak current which may be applied with 8/20us waveform without device failure Wmax - Maximum energy which may be dissipated with the 10/1000us waveform without device failure 2.Characteristics(25 O 5J Varistor voltage Symbol Units Test Condition MLVS0402M04 MLVS0402M07 MLVS0402L08 MLVS0402K11 MLVS0402K14 VV Volts 1mA DC 8 12.5 15 18 22 20 20 15 10 10 VV % ) Clamping Voltage Vc Volts (Max.) 1A 8/20s 19 32 33 38 45 Capacitance Cp pF (typ.) 1KHz 300 155 135 100 95 Series Type / MLV -- Multilayer Varistor Elements / S -- Single Size / 0402 --1.00x0.50x0.50mm Tolerance / M/L/K --20%/15%/10% Vrms -- Working Voltage Vrms Dimensions L W T C C VV - Voltage across the device measured at 1mA DC current Vc - Maximum peak current across the varistor with 8/20us waveform and 1A pulse current Cp - Device capacitance measured with zero volt bias 1Vrms Electrical Characteristics 1.General technical Characteristics Operating temperature Storage temperature Response time Solderability Solder leach resistance -55 ... +125 (85 ) -55 ... +125 (85 ) <1 ns 235 , 2s 260 , 10s Size / EIA L W T C 0402 1.000.15 0.500.08 0.500.08 0.300.15 2. Environmental Characteristics Characteristics Bias humidity Thermal shock Vibration Full load voltage Solder leach resistance Specifications VV /VV 10% VV /VV 10% VV /VV 10% VV /VV 10% VV /VV 10% Test condition 90%RH, 40 , Working voltage, 1000 hours -40 to 85 , 30 min. cycle, 5 cycles 10 to 50 to 10 Hz, 1 min. cycle, 2 hours each in X-Y-Z Working voltage, 25 , 1000 hours 260 , 10s Unit : mm INPAQ TECHNOLOGY CO.,LTD |
Price & Availability of MLVS-0402
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |